Seasonality of nitrous oxide emissions at six full-scale wastewater treatment plants.

Nitrous oxide (N2O) is an ozone-depleting greenhouse gas that contributes significantly to the carbon footprint of a wastewater treatment plant (WWTP). Plant-specific measurement campaigns are required to reliably quantify the emission level that has been found to significantly vary between WWTPs. In this study, the N2O emissions were quantified from five full-scale WWTPs during 4-19-day measurement campaigns conducted under both cold period conditions (water temperature below 12 °C) and warm period conditions (water temperature from 12 to 20 °C). The measurement data were studied alongside long-term monitoring data from a sixth WWTP. The calculated emission factors (EFs) varied from near 0 to 1.8% relative to the influent total nitrogen load. The results confirmed a significant seasonality of N2O emissions as well as a notable variation between WWTPs in the emission level, which a single fixed EF cannot represent. Wastewater temperature was one explanatory factor for the emission seasonality. Both low and high emissions were measured from denitrifying-nitrifying activated sludge (AS) processes, while the emissions from only nitrifying AS processes were consistently high. Nitrite (NO2-) at the end of the aerobic zones of the AS process was linked to the variability in N2O emissions during the cold period.

The transition of WRRF models to digital twin applications.

Digital Twins (DTs) are on the rise as innovative, powerful technologies to harness the power of digitalisation in the WRRF sector. The lack of consensus and understanding when it comes to the definition, perceived benefits and technological needs of DTs is hampering their widespread development and application. Transitioning from traditional WRRF modelling practice into DT applications raises a number of important questions: When is a model's predictive power acceptable for a DT? Which modelling frameworks are most suited for DT applications? Which data structures are needed to efficiently feed data to a DT? How do we keep the DT up to date and relevant? Who will be the main users of DTs and how to get them involved? How do DTs push the water sector to evolve? This paper provides an overview of the state-of-the-art, challenges, good practices, development needs and transformative capacity of DTs for WRRF applications.

Comprehensive evaluation of the carbon footprint components of wastewater treatment plants located in the Baltic Sea region.

Finland and Poland share similar environmental interests with regard to their wastewater effluents eventually being discharged to the Baltic Sea. However, differences in the influent wastewater characteristics, treatment processes, operational conditions, and carbon intensities of energy mixes in both countries make these two countries interesting for carbon footprint (CF) comparison. This study aimed at proposing a functional unit (FU) which enables a comprehensive comparison of wastewater treatment plants (WWTPs) in terms of their CF. Direct emissions had the highest contribution (70%) to the total CF. Energy consumption dominated the total indirect emissions in both countries by over 30%. Polish WWTPs benefitted more from energy self-sufficiency than Finnish plants as a result of higher electricity emission factors in Poland. The main difference between indirect emissions of both countries were attributed to higher chemical consumption of the Finnish WWTPs. Total pollution equivalent removed (TPErem) FU proposed enabled a better comparison of WWTPs located in different countries in terms of their total CF. High correlations of TPErem with other FUs were found since TPErem could balance out the differences in the removal efficiencies of various pollutants. Offsetting CF was found a proper strategy for the studied WWTPs to move towards low-carbon operation. The studied WWTPs could reduce their CF from up to 27% by different practices, such as selling biofuel, electricity and fertilizers. These findings are applicable widely since the selected WWTPs represent the typical treatment solutions in Poland, Finland and in the Baltic Sea region.

Nitrous Oxide Production at a Fully Covered Wastewater Treatment Plant: Results of a Long-Term Online Monitoring Campaign.

The nitrous oxide emissions of the Viikinmäki wastewater treatment plant were measured in a 12 month online monitoring campaign. The measurements, which were conducted with a continuous gas analyzer, covered all of the unit operations of the advanced wastewater-treatment process. The relation between the nitrous oxide emissions and certain process parameters, such as the wastewater temperature, influent biological oxygen demand, and ammonium nitrogen load, was investigated by applying online data obtained from the process-control system at 1 min intervals. Although seasonal variations in the measured nitrous oxide emissions were remarkable, the measurement data indicated no clear relationship between these emissions and seasonal changes in the wastewater temperature. The diurnal variations of the nitrous oxide emissions did, however, strongly correlate with the alternation of the influent biological oxygen demand and ammonium nitrogen load to the aerated zones of the activated sludge process. Overall, the annual nitrous oxide emissions of 168 g/PE/year and the emission factor of 1.9% of the influent nitrogen load are in the high range of values reported in the literature but in very good agreement with the results of other long-term online monitoring campaigns implemented at full-scale wastewater-treatment plants.